- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Fibre tube thermo-rétractable alimentation, fibres optiques bo?te de séparateur répartiteur optique, maintenir la tige, tube de protection de la fibre nue
Nom de l'information: | Fibre tube thermo-rétractable alimentation, fibres optiques bo?te de séparateur répartiteur optique, maintenir la tige, tube de protection de la fibre nue |
Publié: | 2012-05-31 |
Validité: | 30 |
Caractéristiques: | Multiple |
Quantité: | 10000.00 |
Description Prix: | |
Description détaillée du produit: | Le bo?tier répartiteur optique couloir Fait FTTH FTTH développement rapide des technologies connexes, et d'accélérer le processus d'amélioration de l'infrastructure au sol, le SMC armoire optique couloir séparateur est installé dans le dispositif de connexion fibre optique pour l'extérieur ou dans un couloir, il est l'exigence la plus fondamentale est d'être capable de résister à des changements radicaux climatiques et les mauvaises conditions de travail. C'est avoir une condensation étanche, résistant à l'eau et à la poussière, anti-insectes et les rongeurs dommages incidence sur la capacité. Il doit être capable de résister à l'environnement hostile de l'extérieur. Par conséquent, l'extérieur du bo?tier est étanche, résistant à l'humidité, à la poussière, anti-collision, dommages Anti-nuisibles Insectes et rongeurs nécessitent un niveau relativement élevé, la température à l'intérieur, les exigences de contr?le d'humidité est très élevé. Le SMC bo?te optique couloir de séparation bo?tier insaturés matériaux en polyester armé de fibre de verre (SMC), une meilleure performance en imperméable, résistant à l'humidité, anti-collision sans franchise. Répondre aux exigences les répartiteurs optiques couloir bo?te bo?tier. ? Première Introduction: ????? Appliquer le réservoir séparateur optique couloir pour les liens d'accès aux terminaux de systèmes d'accès FTTH, particulièrement adapté pour l'extérieur mural ou utilisés dans des conditions de maintien de la bande. Caractéristiques et description structurelle??: ????? 1: Bo?te de SMC et PC / ABS vie matérielle Hop Chemin de plus de 20 ans. ?????? 2: La conception de la structure à deux niveaux, le séparateur de cablage de couche supérieure optique, inférieure pour la couche d'épissage de fibres. ?????? 3: module optique en utilisant la conception modulaire du tiroir, l'interchangeabilité et de la polyvalence. : Les principaux paramètres techniques (répondre YD/T988-2007 bo?tier de communication Cable de transfert requis) ????? 1: Température ambiante de fonctionnement: -40 ° C à +60 ° C ?????? 2: Humidité d'environnement :: ≤ 95% (+40 ° C) ?????? 3:? Pression atmosphérique: 70 kPa ~ ~ 106Kpa ?????? 4: cable à fibre optique pour entrer le numéro: root 1X2 de (le cable) ?????? 5: fibres de la peau entrez le numéro: root 8X2 (sous dans la fibre) ?????? 6: angle d'ouverture: 180 ° ?????? 7: adaptateur optionnel SC \ FC \ LC ??????? 8: niveau de tension à la terre résistance non inférieure à 3000V (DC) / 1 min sans panne, pas d'arc. ?????? 9: Résistance d'isolement: ≥ 2X1000MΩ/500V10: Dimensions: 383MMX285MMX100MM |
Vous êtes le 13347 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Xiaolin ville, ville de Cixi, facile d'usine de matériel de communication. Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie